Искам да напиша аналог на "пакетния файл" (скрипт на шела) в Ubuntu. Но не знам как да използвам командата chmod +x име на файл
, за да направя така, че скриптът да може да бъде стартиран. Не знам и къде да я използвам.
chmod +x
върху даден файл (вашия скрипт) означава само, че ще го направите изпълним. Щракването с десния бутон на мишката върху вашия скрипт и избирането на Свойства -> Правомощия -> Да се разреши изпълнението на файла като програма, води до абсолютно същия резултат като командата в терминала.
Ако файлът, на който искате да промените правата, се намира в системната директория, може да се наложи да бъдете root
, както е показано по-долу: (бъдете внимателни, докато използвате командата sudo
)
sudo chmod +x /usr/share/testfolder/aFile
Също така не е ясно какво точно искате да архивирате тук. Моля, редактирайте въпроса си и дайте малко повече подробности за действителния проблем!
Можете също така да се обърнете към този въпрос за повече информация: chmod u+x' срещу 'chmod +x
Напишете man chmod
в терминален прозорец (Ctrl+Alt+T) и ще получите следния изход:
НАИМЕНОВАНИЕ: chmod - промяна на битовете на режима на файла
SYNOPSIS
chmod [OPTION]... MODE[,MODE]... FILE...
chmod [OPTION]... OCTAL-MODE FILE...
chmod [OPTION]... --reference=RFILE FILE...
ОПИСАНИЕ
This manual page documents the GNU version of chmod. chmod changes the
file mode bits of each given file according to mode, which can be either
a symbolic representation of changes to make, or an octal number repre‐
senting the bit pattern for the new mode bits.
The format of a symbolic mode is [ugoa...][[+-=][perms...]...], where
perms is either zero or more letters from the set rwxXst, or a single
letter from the set ugo. Multiple symbolic modes can be given, sepa‐
rated by commas.
A combination of the letters ugoa controls which users' access to the
file will be changed: the user who owns it (u), other users in the
file's group (g), other users not in the file's group (o), or all users
(a). If none of these are given, the effect is as if a were given, but
bits that are set in the umask are not affected.
The operator + causes the selected file mode bits to be added to the
existing file mode bits of each file; - causes them to be removed; and =
causes them to be added and causes unmentioned bits to be removed except
that a directory's unmentioned set user and group ID bits are not
affected.
The letters rwxXst select file mode bits for the affected users: read
(r), write (w), execute (or search for directories) (x), execute/search
only if the file is a directory or already has execute permission for
some user (X), set user or group ID on execution (s), restricted dele‐
tion flag or sticky bit (t). Instead of one or more of these letters,
you can specify exactly one of the letters ugo: the permissions granted
to the user who owns the file (u), the permissions granted to other
users who are members of the file's group (g), and the permissions
granted to users that are in neither of the two preceding categories
(o).
A numeric mode is from one to four octal digits (0-7), derived by adding
up the bits with values 4, 2, and 1. Omitted digits are assumed to be
leading zeros. The first digit selects the set user ID (4) and set
group ID (2) and restricted deletion or sticky (1) attributes. The sec‐
ond digit selects permissions for the user who owns the file: read (4),
write (2), and execute (1); the third selects permissions for other
users in the file's group, with the same values; and the fourth for
other users not in the file's group, with the same values.
chmod never changes the permissions of symbolic links; the chmod system
call cannot change their permissions. This is not a problem since the
permissions of symbolic links are never used. However, for each sym‐
bolic link listed on the command line, chmod changes the permissions of
the pointed-to file. In contrast, chmod ignores symbolic links encoun‐
tered during recursive directory traversals.
SETUID И SETGID БИТОВЕ
chmod clears the set-group-ID bit of a regular file if the file's group
ID does not match the user's effective group ID or one of the user's
supplementary group IDs, unless the user has appropriate privileges.
Additional restrictions may cause the set-user-ID and set-group-ID bits
of MODE or RFILE to be ignored. This behavior depends on the policy and
functionality of the underlying chmod system call. When in doubt, check
the underlying system behavior.
ОПЦИИ
Change the mode of each FILE to MODE.
-c, --changes
like verbose but report only when a change is made
--no-preserve-root
do not treat `/' specially (the default)
--preserve-root
fail to operate recursively on `/'
-f, --silent, --quiet
suppress most error messages
-v, --verbose
output a diagnostic for every file processed
--reference=RFILE
use RFILE's mode instead of MODE values
-R, --recursive
change files and directories recursively
--help display this help and exit
--version
output version information and exit
Each MODE is of the form `[ugoa]*([-+=]([rwxXst]*|[ugo]))+'.
Първо, скриптът ви трябва да декларира кой интерпретатор да използва. Това се прави на първия ред на файла. Ако става дума за скрипт с обвивка, това трябва да бъде #!/bin/sh
или #!/bin/bash
.
Ето един скрипт, който изписва вашето потребителско име: echo-whoami.sh
#!/bin/sh
echo $(whoami)
За да го направите изпълним, използвайте chmod +x echo-whoami.sh
. След това можете да го стартирате, като използвате ./echo-whoami.sh
.
Партиен файл и скрипт на шел са два термина, които означават едно и също под Linux. Терминът скрипт обаче се използва много по-често.
Най-простият файл с шел скрипт просто съдържа команди, както бихте ги въвели от командния ред (т.е. от интерпретатора на команди Bash). Теоретично можете дори да замените интерпретатора с всеки език, който ви харесва (и за който имате интерпретатор). За да бъдем по-ясни, предлагаме да започнете първия си ред с
#!/bin/sh
(ако искате максимална преносимост с по-стари системи)
или
#!/bin/bash
(ако искате някои допълнителни функции, които вероятно не ви интересуват днес)
След този ред въведете командите си, по една на всеки ред. Има много допълнителни конструкции извън обхвата на този въпрос, вижте man bash
или http://www.tldp.org/LDP/Bash-Beginners-Guide/Bash-Beginners-Guide.pdf (за начинаещи) или http://www.tldp.org/LDP/abs/abs-guide.pdf (за по-напреднали въпроси).
За да се изпълни вашият скрипт, има две изисквания: Първо, процесът на интерпретатора трябва да прочете файла и второ, той проверява дали той е маркиран като изпълним. От съображения за удобство също така е полезно да можете да записвате в скрипта си (за да можете да правите промени или поправки, ако се наложи).
Ако приемем, че искате членовете на екипа и други лица също да могат да изпълняват (и виждат) вашия скрипт, но не искате да го манипулират, комбинацията от
a+x
или +x
, като a
е по подразбиране),a+r
или +r
, като a
отново е по подразбиране),u=w
)обикновено са разумни стойности на правата на файловете ви. Можете да въведете отделните действия слято, разделени със запетая.
Въпреки че този "език на действията" е много увлекателен (обърнете внимание на разликата между операторите +
и `=``, които водят до различни резултати в зависимост от настройката на разрешенията, преди да ги промените), те са досадни за въвеждане.
Тъй като всички действия създават битови маски, които се прилагат вътрешно, можете да въведете битовите маски (вижте man chmod
за подробности) и директно.
За шелскрипт chmod 755 myscript.sh има най-голям смисъл в поне 95 % от всички случаи.