Menurut docs, Clonezilla mendukung kloning ke drive yang lebih kecil menggunakan opsi -icds. Mari kita kutip:
Jika Anda yakin semua data dari gambar bisa muat di disk yang lebih kecil yang lebih kecil, yaitu tidak akan ditulis ke ruang disk yang salah, Anda dapat memeriksa opsi opsi "-icds"
Itulah kasus saya. Saya mencoba mentransfer OS dan data dari drive teman saya yang gagal ke drive baru. Saya benar-benar ingin menghindari menginstal ulang Win Vista 32bit dan semua SW.
Disk sumber: Drive WD SATA 320 GB dengan dua partisi (C: dan D:), beberapa bad sector. Digunakan sekitar 50 GB dari keseluruhan 320 GB.
Disk target: Crucial MX500 250 GB.
Saya menjalankan UBCD 5.3.8 saat ini dan Clonezilla dalam Parted Magic. Kecuali pengaturan default, saya menambahkan opsi-opsi ini:
Namun, kloning berhenti dengan kesalahan:
Ukuran partisi target (163830 MB) lebih kecil dari sumber (209716 MB). Gunakan opsi -C untuk menonaktifkan pengecekan ukuran (Berbahaya). Gagal mengkloning /dev/sda1 ke /dev/sdb1
Mengapa Clonezilla tidak menghormati pengaturan -icds dan tidak menjalankan Partclone dengan switch -C? Bagaimana cara membuatnya untuk melakukan kloning?
Saya melampirkan isi file log:
Starting /usr/sbin/ocs-onthefly at 2018-09-25 01:49:59 UTC...
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
PS. Next time you can run this command directly:
/usr/sbin/ocs-onthefly -g auto -e1 auto -e2 -j2 -r -rescue -icds -k1 -f sda -t sdb
*****************************************************.
*****************************************************.
The first partition of disk /dev/sda starts at 2048.
Saving the hidden data between MBR (1st sector, i.e. 512 bytes) and 1st partition, which might be useful for some recovery tool, by:
dd if=/dev/sda of=/tmp/ocs_onthefly_local.S1OeQB/src-hidden-data.img skip=1 bs=512 count=2047
2047+0 records in
2047+0 records out
1048064 bytes (1.0 MB) copied, 0.00758521 s, 138 MB/s
*****************************************************.
Collecting partition /dev/sda1 info...
Collecting partition /dev/sda2 info...
Non-grub boot loader found on /tmp/ocs_onthefly_local.S1OeQB/sdb-mbr...
The CHS value of hard drive from EDD will be used for sfdisk.
Searching for data partition(s)...
WARNING! THE EXISTING DATA IN THIS HARDDISK/PARTITION(S) WILL BE OVERWRITTEN! ALL EXISTING DATA WILL BE LOST: sdb
*****************************************************.
Machine: M56S-S3
sdb (250GB_CT250MX500SSD1__CT250MX500SSD1_1829E14A98AF)
sdb1 (152.6G_boot(In_CT250MX500SSD1_)_CT250MX500SSD1_1829E14A98AF)
sdb2 (80.3G(In_CT250MX500SSD1_)_CT250MX500SSD1_1829E14A98AF)
*****************************************************.
Will create the partition on the target machine...
Let me ask you again.
*****************************************************.
[1;33mMachine: M56S-S3
sdb (250GB_CT250MX500SSD1__CT250MX500SSD1_1829E14A98AF)
sdb1 (152.6G_boot(In_CT250MX500SSD1_)_CT250MX500SSD1_1829E14A98AF)
sdb2 (80.3G(In_CT250MX500SSD1_)_CT250MX500SSD1_1829E14A98AF)
[0;39m*****************************************************.
[1;33mWARNING!!! WARNING!!! WARNING!!!
WARNING! THE EXISTING DATA IN THIS HARDDISK/PARTITION(S) WILL BE OVERWRITTEN! ALL EXISTING DATA WILL BE LOST: sdb
[0;39mAre you sure you want to continue? ? (y/n) OK, let's do it!!
Shutting down the Logical Volume Manager
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Trying to clean the MBR and GPT partition table on the destination disk first: /dev/sdb
Creating MBR type's partition table...
[1;33mCreate the proportional partition table based on /tmp/ocs_onthefly_local.S1OeQB/tgt-pt.sf and the size of /dev/sdb...
[0;39mNo partition table exists in target disk /dev/sdb, try to initialize one so that we can get the disk size by parted... done!
The ratio for target disk size to original disk size is .7812.
The partition table to write in /dev/sdb:
*****************************************
unit: sectors
/dev/sdb1 : start= 2048, size= 319979520, Id=7, bootable
/dev/sdb2 : start= 319981568, size= 168371623, Id=7
/dev/sdb3 : start= 0, size= 0, Id=0
/dev/sdb4 : start= 0, size= 0, Id=0
*****************************************
Running: sfdisk --force -C 38912 -H 255 -S 63 /dev/sdb < /tmp/new_sf.2tdNbd
Disk /dev/sdb: 38912 cylinders, 255 heads, 63 sectors/track
Old situation:
Units: cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sdb1 1 30400 30400 244188000 83 Linux
/dev/sdb2 0 - 0 0 0 Empty
/dev/sdb3 0 - 0 0 0 Empty
/dev/sdb4 0 - 0 0 0 Empty
New situation:
Units: sectors of 512 bytes, counting from 0
Device Boot Start End #sectors Id System
/dev/sdb1 * 2048 319981567 319979520 7 HPFS/NTFS/exFAT
/dev/sdb2 319981568 488353190 168371623 7 HPFS/NTFS/exFAT
/dev/sdb3 0 - 0 0 Empty
/dev/sdb4 0 - 0 0 Empty
Successfully wrote the new partition table
Re-reading the partition table ...
Partition table was created by: sfdisk --force -C 38912 -H 255 -S 63 /dev/sdb < /tmp/new_sf.2tdNbd
done!
*****************************************************.
The first partition of disk /dev/sdb starts at 2048.
Restoring the hidden data between MBR (1st sector, i.e. 512 bytes) and 1st partition, which might be useful for some recovery tool, by:
dd if=/tmp/ocs_onthefly_local.S1OeQB/tgt-hidden-data.img of=/dev/sdb seek=1 bs=512 count=2047
2047+0 records in
2047+0 records out
1048064 bytes (1.0 MB) copied, 0.0247041 s, 42.4 MB/s
*****************************************************.
Cloning the boot loader (executable code area) from "sda" to "sdb"...
Now we will start to clone data to the target machine...
Searching for data partition(s) in source disk: sda ...
Source partition file system is ntfs...
Cloning the /dev/sda1 to /dev/sdb1...
Using partclone to clone...
Run partclone: partclone.ntfs -z 10485760 -N --rescue -L /var/log/partclone.log -b -s /dev/sda1 -O /dev/sdb1
Partclone v0.2.66 http://partclone.org
Starting to back up device(/dev/sda1) to device(/dev/sdb1)
we need memory: 6408260 bytes
image head 4160, bitmap 6400000, crc 4100 bytes
Calculating bitmap... Please wait... get device size 163829514240 by ioctl BLKGETSIZE64,
Target partition size(163830 MB) is smaller than source(209716 MB). Use option -C to disable size checking(Dangerous).
Failed to clone /dev/sda1 to /dev/sdb1
Source partition file system is ntfs...
Cloning the /dev/sda2 to /dev/sdb2...
Using partclone to clone...
Run partclone: partclone.ntfs -z 10485760 -N --rescue -L /var/log/partclone.log -b -s /dev/sda2 -O /dev/sdb2
Partclone v0.2.66 http://partclone.org
Starting to back up device(/dev/sda2) to device(/dev/sdb2)
we need memory: 3375908 bytes
image head 4160, bitmap 3367648, crc 4100 bytes
Calculating bitmap... Please wait... get device size 86206270976 by ioctl BLKGETSIZE64,
Target partition size(86207 MB) is smaller than source(110352 MB). Use option -C to disable size checking(Dangerous).
Failed to clone /dev/sda2 to /dev/sdb2
*****************************************************.
Searching for data partition(s) in target disk for post process: sdb...
Now tuning the file system size on partition /dev/sdb1 to fit the partition size...
"boot" is an unknown or unsupported filesystem... Skip resizing that.
*****************************************************.
Now tuning the file system size on partition /dev/sdb2 to fit the partition size...
Unknown or unsupported partition (/dev/sdb2) found! Skip this partition /dev/sdb2.
*****************************************************.
Creating the swap partition if exists...
*****************************************************.
Trying to remove udev hardware record in the restored OS...
The specified destination device: sdb1 sdb2
Trying to remove udev persistent files. The devices to be searched: sdb1 sdb2...
Now searching possible device /dev/sdb1...
Skip /dev/sdb2 (No file system. Extended partition?).
done!
*****************************************************.
Device /dev/sdb1 is not a FAT partition.
Skip updating syslinux on that.
Device /dev/sdb2 is not a FAT partition.
Skip updating syslinux on that.
*****************************************************.
Run grub install on disk sdb...
The grub directory is NOT found. Maybe it does not exist (so other boot manager exists) or the file system is not supported in the kernel. Skip running grub-install.
*****************************************************.
Try to run partclone.ntfsfixboot for NTFS boot partition if it exists. Scanning partition(s): sdb1 sdb2...
The NTFS boot partition was not found or not among the restored partition(s). Skip running partclone.ntfsfixboot.
*****************************************************.
Ending /usr/sbin/ocs-onthefly at 2018-09-25 01:52:34 UTC...
Secara resmi, Clonezilla mengharuskan drive tujuan memiliki ukuran yang sama atau lebih besar dari drive master.
Namun, hal itu bisa dilakukan. Masalah yang Anda hadapi bukanlah ukuran disk, tetapi ukuran partisi. Jika jumlah ukuran partisi lebih besar dari drive tujuan, Clonezilla akan gagal. Anda perlu mengecilkan partisi pada drive master sebelum menjalankan Clonezilla dengan -icds
.
Hal ini bisa dilakukan di lingkungan GParted Live, atau di dalam OS (tergantung setup).
Di Clonezilla, pilih mode expert dan aktifkan opsi "-icds". Anda juga perlu memilih opsi "Ubah ukuran tabel partisi secara proporsional. "
Sebagai alternatif, ada program perangkat lunak kloning disk lain yang dapat melakukan ini secara otomatis.