Como se muda o tamanho da figura desenhada com matplotlib?
figura diz-lhe a assinatura da chamada:
from matplotlib.pyplot import figure
figure(num=None, figsize=(8, 6), dpi=80, facecolor='w', edgecolor='k')
Figure(figsize=(1,1))`criaria uma imagem polegada por polegada, que seria de 80 por 80 pixels, a menos que você também dê um argumento diferente de dpi.
Nota de depreciação:** De acordo com o guia oficial Matplotlib, o uso do módulo
pylab
não é mais recomendado. Por favor considere a utilização do módulomatplotlib.pyplot
, como descrito por esta outra resposta.
O seguinte parece funcionar:
from pylab import rcParams
rcParams['figure.figsize'] = 5, 10
Isto faz com que a figura tenha 5 polegadas de largura, e 10 polegadas de altura.
A classe Figura então usa isto como o valor padrão para um de seus argumentos.
O primeiro link no Google para `'matplotlib figure size'' é AdjustingImageSize (Google cache da página).
Aqui está um roteiro de teste da página acima. Ele cria arquivos test[1-3].png
de diferentes tamanhos de uma mesma imagem:
#!/usr/bin/env python
"""
This is a small demo file that helps teach how to adjust figure sizes
for matplotlib
"""
import matplotlib
print "using MPL version:", matplotlib.__version__
matplotlib.use("WXAgg") # do this before pylab so you don'tget the default back end.
import pylab
import numpy as np
# Generate and plot some simple data:
x = np.arange(0, 2*np.pi, 0.1)
y = np.sin(x)
pylab.plot(x,y)
F = pylab.gcf()
# Now check everything with the defaults:
DPI = F.get_dpi()
print "DPI:", DPI
DefaultSize = F.get_size_inches()
print "Default size in Inches", DefaultSize
print "Which should result in a %i x %i Image"%(DPI*DefaultSize[0], DPI*DefaultSize[1])
# the default is 100dpi for savefig:
F.savefig("test1.png")
# this gives me a 797 x 566 pixel image, which is about 100 DPI
# Now make the image twice as big, while keeping the fonts and all the
# same size
F.set_size_inches( (DefaultSize[0]*2, DefaultSize[1]*2) )
Size = F.get_size_inches()
print "Size in Inches", Size
F.savefig("test2.png")
# this results in a 1595x1132 image
# Now make the image twice as big, making all the fonts and lines
# bigger too.
F.set_size_inches( DefaultSize )# resetthe size
Size = F.get_size_inches()
print "Size in Inches", Size
F.savefig("test3.png", dpi = (200)) # change the dpi
# this also results in a 1595x1132 image, but the fonts are larger.
Saída:
using MPL version: 0.98.1
DPI: 80
Default size in Inches [ 8. 6.]
Which should result in a 640 x 480 Image
Size in Inches [ 16. 12.]
Size in Inches [ 16. 12.]
Duas notas:
Os comentários do módulo e a saída real são diferentes.
Esta resposta permite combinar facilmente as três imagens em um arquivo de imagem para ver a diferença de tamanhos.